New Ebara Steel Butterfly Centrifuge Electropump Expand

Ebara Steel Butterfly Centrifuge Electropump

Ebara Ebara

New

$ 262

International shipping + Insurance

Best price guarantee

Secure payment

Purchasing Guide for Ebara Steel Butterfly Centrifuge Electropump 

  1. Price of Ebara mono-butterfly (steel butterfly) Centrifuge Electropump will be quoted upon the customer’s demand .
  2. All Ebara steel mono-butterfly Centrifuge Electropumps are suitable for increase of water supply pressure in water treatment and irrigation and for air-conditioning system and water pumping station mixing with abrasive and corrosive liquids and other industrial applications.
  3. Diameter of flange, drift and suction of pump is not obligatorily equal to diameter of pipe suitable for connection, since diameter of suction and deliverability pipe should be considered in such a way that maximum water speed in suction pipe of pump does exceed 2 M./second. and approximate selection diagram of water supply systems pipes diameter are shown in above figures to be used by the experts.       
  4. All kinds of Ebara Pumps are made in Italy and are provided with 18-month warranty.

The points should be considered after purchasing Ebara Mon-Butterfly Centrifuge Electropump 

  1. After installation of pump and chassis on rubber or metal stabilizers installed on the foundation, note that chassis and pump are fully balanced to be sure of slow and without vibration performance of pump during performance and operation period  
  2. Control weight of tubes by sufficient supports and do not press the ground pump as support of weight of tubes of piping system.  
  3. In eccentricity water supply ground pumps , if height of water drive exceeds 15 M. and or length of route remarkably is long, it is necessary to install one-way valve between pump and valve and gate valve to prevent from hummer while turning off the pump and you are recommended to install a gate valve in this route in order to adjust pump operating point and prevent from excessive absorption power of which.    
  4. For proper operation of pump, a filter should be installed in the suction pipe route and execute suction pipe route absolutely without water leak with ramp in direction of pump.
ModelThrust flange diameter (in)Suction Flange diameter (in)Butterfly diameter (mm)Electromotor Power (KW)Flow Rate (M³/H)Head(M)Used powerMotor Speed(RPM)Price($)
VФ
CDXM70/051"1 1/4"3040.3751622012900262
CDXM70/071"1 1/4"3040.5552122012900279
CDXM90/101"1 1/4"3040.7552422012900286
CDXM120/071"1 1/4"3040.5581622012900286
CDXM120/121"1 1/4"3040.982322012900351
CDXM120/201"1 1/4"3041.583222012900400
CDXM200/121"1 1/2"3040.9131522032900381
CDXM200/201"1 1/2"3041.5132522032900457
CDX70/051"1 1/4"3040.3751622032900260
CDX70/071"---3010.5552122032900273
CDX90/101"1 1/4"3050.7552422032900282
CDX120/071"1 1/4"3040.5581622032900275
CDX120/121"1 1/4"3040.982322032900341
CDX120/201"1 1/4"3041.583122032900379
CDX200/121"1 1/2"3040.9131522032900371
CDX200/201"1 1/2"3041.5132522032900435
CDX200/251"1 1/2"3041.8133122032900520

Write a review

ModelThrust flange diameter (in)Suction Flange diameter (in)Butterfly diameter (mm)Electromotor Power (KW)Flow Rate (M³/H)Head(M)Used powerMotor Speed(RPM)Price($)
VФ
CDXM70/051"1 1/4"3040.3751622012900262
CDXM70/071"1 1/4"3040.5552122012900279
CDXM90/101"1 1/4"3040.7552422012900286
CDXM120/071"1 1/4"3040.5581622012900286
CDXM120/121"1 1/4"3040.982322012900351
CDXM120/201"1 1/4"3041.583222012900400
CDXM200/121"1 1/2"3040.9131522032900381
CDXM200/201"1 1/2"3041.5132522032900457
CDX70/051"1 1/4"3040.3751622032900260
CDX70/071"---3010.5552122032900273
CDX90/101"1 1/4"3050.7552422032900282
CDX120/071"1 1/4"3040.5581622032900275
CDX120/121"1 1/4"3040.982322032900341
CDX120/201"1 1/4"3041.583122032900379
CDX200/121"1 1/2"3040.9131522032900371
CDX200/201"1 1/2"3041.5132522032900435
CDX200/251"1 1/2"3041.8133122032900520