Butane Radiator

Purchasing Guide for Butane Radiator

1. The highest heat power of each blade and as a result, need to lower blades
2. The highest resistance against corrosion and minimum bleeding due to interior protection coating
3. Balancing of 100% blades due to production of robotic
4. Automatic Test of 100% of radiators
5. Triple phase process of radiator color with paint coating for quality assurance and resistance
6. Full-automatic assembly line of radiator with fully-distinguished quality of weld
7. Campatible with all kinds of heating systems: wall-mounted package, central power house, solar systems, condensation boiler, all kinds of thermostats and timers
8. Beautiful, durable costing and color steady
9. Easiness and speed of installation
10. Diversity in model and number of blades    
11. For calculation of number of aluminum radiator blades required for residential apartments under climatic conditions such as Tehran, consider 90 kilocalories of heating per Sqm. of useful infrastructure at floors constructed in the middle of building and 110 kilocalories of heating for the last floors. (If you like, you may contact the experts of Dama Tajhiz Co. to estimate number of required blades)
12. Butane aluminum radiators hold European Quality Standard Sign CE.
13. Work pressure of Butane aluminum radiator equals to 6 bars and are provided with 10-year of warranty.
14. Butane aluminum radiators are produced on full die casting basis, it means that each blade of them is produced integratedly by aluminum casting on pressurized basis. 
15. ∆T=60° C means 60 cg. temperature difference between hot water entered to radiator and room air temperature

The points should be considered after purchasing Butane Aluminum Radiators

1. 1- Devices required for installation of each block of Butane aluminum radiator include:

• - A set of tab and radiator lock knee (You are recommended to provide more suitable comfortable situation at home or workplace in addition to energy saving by using radiator thermostat tab and adjustment with favorite temperature).
• - A radiator bleeding valve
• - Radiator wall clips
• - A set of left or right bobbin cap and four washers

Expense of installation devices has not been stipulated in the above prices and should be separately purchased. While installing the aluminum radiator, the bottom edge of each radiator block should be located only for 10 to 12 Cm. higher than finished floor of installation site since radiators fail to heat the space.  Do not forget bleed radiators before cooling season after installation and sealing them.