New Absal Evaporative Air Cooler Expand

Absal Evaporative Air Cooler

Aabsal Aabsal

New

$ 89

International shipping + Insurance

Best price guarantee

Secure payment

Purchasing Guide for Absal Evaporative Air Cooler

  1. Using A/Cs is suitable for the most zones in the country which have warm and dry climate in the summer, but they are not suitable for the zones with warm and wet climate (sultry).
  2. All Evaporative Air Cooler's of Absal Co. have galvanized shell and functionality with single phase and 220 V. electricity.
  3. Absal Evaporative Air Coolers Model AC 31 which are suitable for the space with an area of 25 Sqm., can be easily installed at room near the window and also can be installed outside the room (behind the window). Their water tank can be filed both by connection to urban water pipe and by hand (manually). Butterfly of this A/C is impact resistant and does not absorb particles. Its shell is made of high quality galvanized sheet and has been coated with thick layer of coating powder to have long life.    
  4. There are the following properties of Absal Evaporative Air Coolers Model AC 31:
  • Durable and impact resistant water tank made of reinforced polyamide plastic
  • 200 V. input power
  • Low-consumption and cost-effective compared to other similar home appliance
  • Equipped with indicator of water surface inside the tank
  • Rotary valve of air adjustment and air movability of favorable angles 

There is not vibration and noise while operating due to being integrated and balanced the butterfly in Absal A/Cs Models AC 55, AC 40- AC 35, AC 70, as a result, bearings and A/C have long life. Its new water supply system causes coolness input of A/C and prevents from water pouring on the electromotor; as a result, motor cannot be damaged due to electric shock. There are the following properties of Absal A/Cs Models AC 35, AC 40, AC 55 and AC 70:

  • Having usability of E-switch and remote control.
  • Straws with equal thickness in all surfaces, produced by automatic systems, cause optimal air flow and largely prevents from penetration of dust to the room.  

For approximate calculation of required A/C capacity under climatic conditions such as Tehran, use A/Cs Model similar to AC35 for apartments with an area of 70 Sqm. which are constructed in the middle of building and are not exposed to sunlight and their A/C duct work was on correct method, and use Model AC40 for apartments with an area of 130 Sqm., use A/C AC55 for apartments with an area of 150 Sqm. and use A/C AC70 for apartments with an area of 170 Sqm. In case apartment demanded by you is located on the top floor whose ceiling is directly exposed to the sunlight in the summer, by observing other above conditions, use Absal A/C similar to Model AC35 for apartment with an area of 75 Sqm., use Absal AC40 for apartments with an area of 140 Sqm., use Absal AC55 for apartments with an area of 150 Sqm., use Absal AC70 for apartments with an area of 155 Sqm. Absal Evaporative Air Cooler models are provided with 2-year warranty of product and 10-year of electromotor, board and switch. In case you’re A/C is installed on the roof, you are kindly requested to pay attention  to the dimensions of required A/C (as stipulated in technical specifications) and possible passage through door of dome roof (mound) of the building, before purchasing.  Dimensions of A/C duct should be considered bigger than that of outlet of A/C air , otherwise, air volume is condensed while passing through duct and prevents from suitable air flow inside the AC duct, in a other word, the more suitable dimensions of duct dimensions causes the less static pressure of fan for air passage and as a result, quantity of aeration and coolness of A/C will be more.   Cross section of air outlet duct or the following models are as follows: for A/C for Models AC35 is at least about 1600 Cm. (equal to 40×40 Cm.) and for Models AC 40 at least 2300 Cm. (equal to 48×48 Cm.) for Models AC 55 at least 2500 Cm. (equal to 50×50 Cm.), and for Models AC 70 at least 3000 Cm. (equal to 55×55 Cm.) (Obviously precise dimensions are calculated by Ductilator based on length of duct route and required air volume)   Quantity of aeration and coldness created by A/Cs fully depends on observance of duct engineering principles and generally calculations of A/C duct shall be done by Installations Engineers and by Ductilator and considering route angle change standards (internal arc radius) and change of ducts dimensions (at most with 15 cg. angle), otherwise, production of cold air by A/C is not expected and as it is observed, at present the consumers inevitably refer to other cooling and mostly used systems such as splits due to this shortcoming.    


The points should be taken into consideration after purchasing Absal A/C

  1. Regarding air contamination and existence of salt in the water causing sediment on the shell and straw of A/C, it is necessary to annually exchange straw after 1500 hours of A/C function and or at least at the beginning of season of A/C start-up.
  2. Prevent from direct sunlight on the A/C by canopy on the A/C and in case more than 2 M. of A/C duct length is exposed to sunlight, it is necessary to insulate A/C duct.
ModelAeration (cfm)Fan Static PRESSURE
(mm H2O)
Electromotor Power
(hp)
Outlet Chamber Dimension
(cm)
WeightInlet PowerDimensions (cm)Price($)
High SpeedLow SpeedWidthLengthkgwLengthWidthHeight
AC 31900------1/8------20.520060.642.658.389
AC 352300------1/334.53545530737385173
AC 403500------1/34848.8655308787100197
AC 553900------1/24848.8666908787100215
AC 704900------3/45254.1838908787115260

Write a review

ModelAeration (cfm)Fan Static PRESSURE
(mm H2O)
Electromotor Power
(hp)
Outlet Chamber Dimension
(cm)
WeightInlet PowerDimensions (cm)Price($)
High SpeedLow SpeedWidthLengthkgwLengthWidthHeight
AC 31900------1/8------20.520060.642.658.389
AC 352300------1/334.53545530737385173
AC 403500------1/34848.8655308787100197
AC 553900------1/24848.8666908787100215
AC 704900------3/45254.1838908787115260