Reduced price! New DamaTajhiz bottle type fiberglass cooling tower DT.C.200 Expand

DamaTajhiz bottle type fiberglass cooling tower DT.C.200

DamaTajhiz DamaTajhiz

New

Pre-sale Services :

Engineering consulting
Calculating and Determining the capacity

Warranty and after-sale Services :

24 months DamaTajhiz golden warranty + 10 years technical support
Warranty terms : 36 months body warranty + 24 months internal parts warranty

More details

$ 3,168

$ 3,600

-12%

International shipping + Insurance

Best price guarantee

Secure payment


  1. Dimensions (H , D) : 375*370 cm

  2. Equipped with Siemens electromotor (Europe made) with the possibility of installing inverter for reducing electricity consumption and parts wear/motor power: 5.5 Hp

  3. Normal water mass flow: 705 GPM

  4. Equipped with deep galvanized structure and metallic parts

  5. Fiberglass-made casing, basin and air intake, made of the best resin type with the maximum thickness coated by two layers of anti-UV gelcoat coating

  6. Aluminum-structured sprinkler with antiscalant nozzles

Purchase guide for DamaTajhiz bottle type fiberglass cooling tower DT.C.200

Performance

  • DamaTajhiz bottle type fiberglass cooling tower DT.C.200 is designed to work with counter flow air system.
  • In this design in order to cool the circulating water, some of the water in cooling tower is evaporated and because evaporation is endothermic, remaining water in the tower gets cool (the maximum temperature which the circulating water can reach is the ambient's wet bulb temperature) and is sucked by water circulating pumps after gathering in cooling tower basin.
  • Performance of fiberglass cooling tower DT.C.200 is designed in accordance with ATC-105 code of C.T.I. additionally, performance of these towers is approved by E.P.A.
  • Generally, calculation and designing of cooling towers are based on following standard parameters: temperature of inlet water: 95oF, temperature of outlet cool water: 85oF, and W.B.T: 75oF.
  • Outlet water temperature depends on W.B.T and maximum temperature reduction in outlet water of cooling tower is about 3ooC more than W.B.T. For example if W.B.T of Tehran (Capital City of Iran) in summer is 22oC, in the best condition temperature of cooled water in cooling tower is about 25oC.
  • DamaTajhiz bottle type fiberglass cooling tower DT.C.200 is of draft induced type. In these cooling towers air flow in the tower takes place naturally or could be as forced type. Induction is done by an axial fan placed on top of the tower.
  • DamaTajhiz bottle type fiberglass cooling tower DT.C.200 has 3 years body warranty, 2 years internal parts warranty and 10 years technical support.

    DAMATAJHIZ bottle type fiberglass cooling tower

CasingDAMATAJHIZ bottle type fiberglass cooling tower

  • Body parts of DamaTajhiz cooling towers are made of reinforced fiberglass and have high strength. They have two special covers and are UV-resistant. Casing parts can be assembled easily for yearly services.
  • All attachments are of non-metallic materials such as PRC-FRP-ABS or stainless steel or aluminum.
  • Air inlet vents in DamaTajhiz fiberglass cooling tower DT.C.200 is made such that they have the least resistance against air entering and prevents water drops. These vents can be opened and closed to provide access to basin of cooling tower.

ElectromotorDAMATAJHIZ bottle type fiberglass cooling tower

  • Electromotor of DamaTajhiz bottle type fiberglass cooling tower DT.C.200 is generally of SIEMENS brand and have IP55 sensitivity in water-resistant thermal class of F.
  • based on their cooling method they are categorized in TE AO and TE FC classes.
  • DamaTajhiz cooling towers have standard noise but they are also produced in low noise and super low noise models with different dimensions and prices than other cooling towers.

Packings

  • Layers of Sheets in packings of DamaTajhiz bottle type fiberglass cooling tower DT.C.200 is waved and are put on each other as honeycomb.
    DAMATAJHIZ bottle type fiberglass cooling towerSteps have sinusoidal design and their obstruction is impossible so they can maximize heat transfer by providing an appropriate bed for water film formation and fast evaporation and larger interface with air.
  • By customer request, drop catcher parts are installed on packings to prevent transpiration of water drops by fan; installing these parts reduces water drop jet to less than 0.02 percent of circulating water in cooling tower (this is less than amount allowed by EPA).

Water distribution system

  • In bottle type cooling tower DT.C.200 , inlet water enters tower through polyethylene central pipe and then is transferred to aluminum sprinkler head and then is sprayed evenly and radially on packings by distribution arms that have orifices with appropriate diameter and angle.
  • to prevent water waste , the least distance is considered between arm's exit place and packings.

Supports

  • Supports of DamaTajhiz bottle type cooling tower DT.C.10 up to model DT.C.175 are of fiberglass and in higher capacities hot dip galvanized structures are used. Cooling towers of model DT50 and higher are subject to O.S.H.R as mandatory standard and hot dip galvanized ladders are used to access to mechanical and electrical parts on cooling tower.

Inverter systemDAMATAJHIZ bottle type fiberglass cooling tower

  • In case of customer request, speed of fan and motor (RPM) can be changed by installing inverter system on electrical panel of cooling tower to provide exact control of outlet water (if inverter system is ordered a separate electrical board should be provided for tower).
  • Order of inverter frequency change is applied by a sensor in a determined temperature range. Performance of inverters is as frequency changes and therefore electromotor power remains constant.
  • When temperature of outlet water is not so important, thermostat is used to control water temperature by motor on and off.

Final words

  • If diameter of your fiberglass cooling tower is more than 250cm, it is recommended to transport it to project site as separated parts to prevent any damage to it. It is obvious that final assembly of these towers on project site has separate expense that should be paid by customer.
  • If it is not possible to transport integrated cooling tower to project site or installment site, please order cooling tower as DEMONTAGE on order time.
  • All transport and montage expenses (if needed) should be paid by customer.

List of customers and recent projects of DamaTajhiz bottle type fiberglass cooling tower:

DAMATAJHIZ bottle type fiberglass cooling tower

  • Mihanzaj Co: DamaTajhiz bottle type fiberglass cooling tower - capacity : 450 TON
  • Ezogame shargh Co : DamaTajhiz bottle type fiberglass cooling tower - capacity : 400 TON
  • Yazd tissue Co : DamaTajhiz bottle type fiberglass cooling tower - capacity : 175 TON
  • Yazd wire and cable Co : DamaTajhiz bottle type fiberglass cooling tower - capacity : 100 TON
  • Maddy tak cis : DamaTajhiz bottle type fiberglass cooling tower - capacity : 100 TON
  • Saipa Co : DamaTajhiz bottle type fiberglass cooling tower - capacity : 400 TON
  • Pars Khazar Co: DamaTajhiz bottle type fiberglass cooling tower - capacity : 100 TON
  • Yek o Yek Co : DamaTajhiz bottle type fiberglass cooling tower - capacity : 150 TON
  • Sookht Ama Co : DamaTajhiz bottle type fiberglass cooling tower - capacity : 60 TON
  • Khorasan Electric Industrial Co : DamaTajhiz bottle type fiberglass cooling tower - capacity : 100 TON
  • Ali Nasab industrial Co : DamaTajhiz bottle type fiberglass cooling tower - capacity : 100 TON
  • Mana polymer Co : DamaTajhiz bottle type fiberglass cooling tower - capacity : 160 TON
  • Iran Helicopter Co. (Panha) : DamaTajhiz bottle type fiberglass cooling tower - capacity : 250 TON
  • Qom Rubber industrial Co : DamaTajhiz bottle type fiberglass cooling tower - capacity : 60 TON
  • University of Science and Technology : DamaTajhiz bottle type fiberglass cooling tower - capacity : 60 TON
  • Khorasan Razavi Broadcasting : DamaTajhiz bottle type fiberglass cooling tower - capacity : 150 TON
  • Ferdowsi University of Mashhad : DamaTajhiz bottle type fiberglass cooling tower - capacity : 30 TON
  • Azad University ,Najafabad branch : DamaTajhiz bottle type fiberglass cooling tower - capacity : 300 TON
  • Male Dormitory of Tehran University : DamaTajhiz bottle type fiberglass cooling tower - capacity : 150 TON
  • Female Dormitory of Tehran University : DamaTajhiz bottle type fiberglass cooling tower - capacity : 150 TON
  • Islamic Azad University : DamaTajhiz bottle type fiberglass cooling tower - capacity : 125 TON
  • Refractory materials production Company : DamaTajhiz bottle type fiberglass cooling tower - capacity : 120 TON
  • Project of Mr. Peykarara- Tehran : DamaTajhiz bottle type fiberglass cooling tower - capacity : 100 TON
  • Khavaran Pars polymer Co : DamaTajhiz bottle type fiberglass cooling tower - capacity : 60 TON
  • Project of Mr. Mardani, Saadatabad : DamaTajhiz bottle type fiberglass cooling tower - capacity : 170 TON
  • Mahan Airline : DamaTajhiz bottle type fiberglass cooling tower - capacity : 90 TON
  • Tehran Delta : DamaTajhiz bottle type fiberglass cooling tower - capacity : 250 ToN
  • Niyavaran "Anushiravan" residential project : DamaTajhiz bottle type fiberglass cooling tower - capacity : 150 TON
  • Sharif Energy Research Institute : DamaTajhiz bottle type fiberglass cooling tower - capacity : 25 TON
  • Boroojen Baharan Chemistry : DamaTajhiz bottle type fiberglass cooling tower - capacity : 125 TON
  • Alfosayl project in UAE : DamaTajhiz bottle type fiberglass cooling tower - capacity : 60 TON
  • Alfosayl project in Morocco : DamaTajhiz bottle type fiberglass cooling tower - capacity : 50 TON
  • Medical University of Kashan : DamaTajhiz bottle type fiberglass cooling tower - capacity : 175 TON
  • Iran language institute : DamaTajhiz bottle type fiberglass cooling tower - capacity : 125 TON
By material typefiberglass
By typeBottle
By capacity200
ModelDT.C. 200
cooling capacity (TR)200
water mass flowrate (GPM)705
electromotor power(inch)HP5/5
KW4
Dimensions(cm)Diameter370
Height375
fan airation (CFM)47100
weight (kg)2100
connection sizes (inch)inlet6
outlet6
Overflow size(inch)3
Discharge size(inch)1 1/2
Floating size(inch)1

Write a review

DamaTajhiz bottle type fiberglass cooling tower DT.C.200

DamaTajhiz bottle type fiberglass cooling tower DT.C.200

Model2DTCHS-160W
Nominal Capacity (TR)160
Actual Capacity (TR)129.5
Number of Compressors2
Cold Water Mass Flow Rate(GPM)311
Condenser Water Mass Flow Rate (GPM)380
Dimensions(cm)Length350
Width170
Height200
Electrical SpecificationsKW120
A200