Reduced price! New DamaTajhiz fiberglass cubic cooling tower DTC-CO 350 Expand

DamaTajhiz fiberglass cubic cooling tower DTC-CO 350

DamaTajhiz DamaTajhiz

New

Pre-sale Services :

Engineering consulting
Calculating and Determining the capacity

Warranty and after-sale Services :

24 months DamaTajhiz golden warranty + 10 years technical support
Warranty terms : 36 months body warranty + 24 months internal parts warranty

More details

$ 5,512

$ 6,124

-10%

International shipping + Insurance

Best price guarantee

Secure payment


  1. Dimensions (H , L , W) : 420*320*320 cm

  2. Equipped with Siemens electromotor (Europe made) with the possibility of installing invertor for reducing electricity consumption and parts wear/motor power: 10 HP

  3. Normal mass flow of water: 1230 GPM

  4. Equipped with deep galvanized structure and metallic parts

  5. Fiberglass-made casing, basin and air intake, made of the best resin type with the maximum thickness coated by two layers of anti-UV gelcoat coating

  6. Equipped with antiscalant deck spray nozzles and high pressure injection pipes

Purchase guide for DamaTajhiz fiberglass cubic cooling tower DTC-CO 350

PerformanceDAMATAJHIZ fiberglass cubic cooling tower

  • DamaTajhiz fiberglass cubic cooling tower model DTC-CO 350 is designed to work with counter flow air system.

  • In this design in order to cool the circulating water, some of the water in cooling tower is evaporated and because evaporation is endothermic, remaining water in the tower gets cool (the maximum temperature which the circulating water can reach is the ambient's wet bulb temperature) and is sucked by water circulating pumps after gathering in cooling tower basin.
  • Performance of fiberglass cooling towers is designed in accordance with ATC-105 code of C.T.I. additionally, performance of these towers is approved by E.P.A.
  • Generally, calculation and designing of cooling towers is based on following standard parameters: temperature of inlet water: 95oF, temperature of outlet cool water: 85oF, and W.B.T: 75oF.
  • Outlet water temperature depends on W.B.T and maximum temperature reduction in outlet water of cooling tower is about 3ooC more than W.B.T. For example if W.B.T of Tehran in summer is 22oC, in the best condition temperature of cooled water in cooling tower is about 25oC.
  • DamaTajhiz fiberglass cubic cooling tower model DTC-CO 350 is of draft induced type. In these cooling towers air circulation in the tower takes place naturally or could be as forced type. Induction is done by an axial fan placed on top of the tower.

  • DamaTajhiz fiberglass cubic cooling tower model DTC-CO 350 has 3 years body warranty, 2 years internal parts warranty and 10 years technical support.

DAMATAJHIZ fiberglass cubic cooling tower

Casing

  • Body parts of DamaTajhiz cooling towers are made of reinforced fiberglass and have high strength. They have two special covers and are UV-resistant. Casing parts can be assembled easily for yearly services.

  • All attachments are of non-metallic materials such as PRC-FRP-ABS or stainless steel or aluminum.
  • Air inlet vents in DamaTajhiz fiberglass cubic cooling tower model DTC-CO 350 is made such that they have the least resistance against air entering and prevents water loss. These vents can be opened and closed to provide access to basin of cooling tower.

ElectromotorDAMATAJHIZ fiberglass cubic cooling tower

  • Electromotor of DamaTajhiz fiberglass cubic cooling tower model DTC-CO 350 is generally of SIEMENS brand and have IP55 sensitivity in water-resistant thermal class of F.

  • Based on their cooling method they are categorized in TE AO and TE FC classes.
  • DamaTajhiz cooling towers have standard noise but they are also produced in low noise and super low noise models with different dimensions and prices than other cooling towers.

PackingsDAMATAJHIZ fiberglass cubic cooling tower

  • Layers of Sheets in packings of DamaTajhiz fiberglass cubic cooling tower model DTC-CO 350 is waved and are put on each other as honeycomb.
    Steps have sinusoidal design and their obstruction is impossible so they can maximize heat transfer by providing an appropriate bed for water film formation and fast evaporation and larger interface with air.
  • By customer request, drop catcher parts are installed on packings to prevent transpiration of water drops by fan; installing these parts reduces water drop jet to less than 0.02 percent of circulating water in cooling tower (this is less than amount allowed by EPA).

Water distribution system

  • In cubic cooling towers, inlet water enters tower through polyethylene central pipe and then is transferred to aluminum sprinkler head and then is sprayed evenly and radially on packings by distribution arms that have orifices with appropriate diameter and angle.
  • to prevent water waste , the least distance is considered between arm's exit place and packings.

Supports

  • Supports of DamaTajhiz fiberglass cubic cooling towers up to model DT-175 are of fiberglass and in higher capacities hot dip galvanized supports are used. Cooling towers of model DT50 and higher are subject to O.S.H.R as mandatory standard and hot dip galvanized ladders are used to access to mechanical and electrical parts on cooling tower.

Inverter systemDAMATAJHIZ fiberglass cubic cooling tower

  • In case of customer request, speed of fan and motor (RPM) can be changed by installing inverter system on electrical panel of cooling tower to provide exact control of outlet water (if inverter system is ordered a separate electrical board should be provided for tower).

  • Order of inverter frequency change is applied by a sensor in a determined temperature range. Performance of inverters is as frequency changes and therefore electromotor power remains constant.

  • When temperature of outlet water is not so important, thermostat is used to control water temperature by motor on and off.

Final words

  • If diameter of your fiberglass cooling tower is more than 250cm, it is recommended to transport it to project site as separated parts to prevent any damage to it. It is obvious that final assembly of these towers on project site has separate expense that should be paid by customer.
  • If it is not possible to transport integrated cooling tower to project site or installment site, please order cooling tower as DEMONTAGE on order time.
  • All transport and montage expenses (if needed) should be paid by customer.

    DAMATAJHIZ fiberglass cubic cooling tower

List of customers and recent projects of DamaTajhiz fiberglass cubic cooling tower :

Ductile pipe manufacturing company : DamaTajhiz fiberglass cubic cooling tower - capacity : 400 TON

Hamoun nayzeh(HANYCO) Factory : DamaTajhiz fiberglass cubic cooling tower - capacities : 100,200,250,400 TON

Karmania - Bam Automotive : DamaTajhiz fiberglass cubic cooling tower - capacity : 80 TON

Governor of Zahedan
: DamaTajhiz fiberglass cubic cooling tower - capacity : 60 TON

Zaferanieh
"Parmida" project : DamaTajhiz fiberglass cubic cooling tower - capacity : 170 TON


Refractory materials
production Company : DamaTajhiz fiberglass cubic cooling tower - capacity : 120 TON

Pars Polymer Khavaran Company : DamaTajhiz fiberglass cubic cooling tower - capacity : 60 TON


Niyavaran"Anushiravan" residential project : DamaTajhiz fiberglass cubic cooling tower - capacity : 150 TON

damatajhiz cooling tower
By material typefiberglass
By typeCubic
By capacity350
ModelDTC-CO 350
cooling capacity (TR)350
water mass flowrate (GPM)1230
electromotor power(inch)HP10
KW7/5
Dimensions(cm)Length320
Width320
Height320
fan diameter (cm)420
fan airation (CFM)83500
noise level dB(A)72
weight (kg)3500
connection sizes (inch)inlet8
outlet2*4
Overflow size(inch)2
Discharge size(inch)2
Floating size(inch)1

Write a review

ModelDTC-CO 350
cooling capacity (TR)350
water mass flowrate (GPM)1230
electromotor power(inch)HP10
KW7/5
Dimensions(cm)Length320
Width320
Height320
fan diameter (cm)420
fan airation (CFM)83500
noise level dB(A)72
weight (kg)3500
connection sizes (inch)inlet8
outlet2*4
Overflow size(inch)2
Discharge size(inch)2
Floating size(inch)1