Pakab Control Electronic descalers

Purchasing Guide for Pakab Control Electronic descalers 

1. Soluble salts in water are in the form of ion by which the sediment is formed. Pakab Control Electronic descalers system transfers electromagnetic waves to the pipe (tube) by using microprocessor technology. Then electric potential in running water is induced in the magnetic field. This phenomenon causes imbalance between positive and negative ions in the water and ions motility against each other. Due to this phenomenon, the suspended and neutral particles are formed. These particles based on snowball phenomenon causes absorption of other particles in water and their size becomes coarser in movement route in water, but due to being neutral, it does not adhere to the tube wall and form sediment in tube wall and other equipment in contacting with water.
   
   
2. When ions soluble in water are decreased, water solubility is increased. While increasing water solubility, the ex-sediments inside tube (pipe) and the equipment connected therein are solved gradually.   
    
3. Under influence of the field resulting from this machine, the soluble salts become in the form of neutral and suspended particles which are removed together with water flow and since changes made in water by Electronic descalers are physical changes, the mineral salts existing in water is not exited from it , as a result, quality of potable water remains desirable as before.   
   
   
4. Several advantages of Pakab Control Electronic Sediment Debugger are as follows: 
   
   

• Prevention from sediment in tubes wall and installations and removal of pre - formed sediments
• Increase of heat transfer in exchangers and energy consumption saving
• Decrease of corrosion and increase of tubes and equipment life
• Non-change in potable water quality
• Decrease of detergent consumption
• Environmentally compatible
• Need to less irrigation in agriculture and more growth of plants
• Less cost in comparison with other sediment debugger methods and similar foreign products
• Easy installation and no need to piping
• No need to supply of additives
• No need to supply of additives
• Low power consumption (usage)
  
  

Pakab Control Electronic descalers Model PAC-12 with small dimensions, regarding space limitation in the small spaces, is used in the systems such as wall-mounted water heaters, chillers, package , in which sedimentation is one of the most important problems.  

Pakab Control Electronic descalers can be used in all installations working with hard water including : all kinds of heat and cool exchangers, hot water boiler, package unit, air washers , and cooling towers, residential/office/trading buildings, gardening, drip irrigation, plastic injection factories, ice and soft drink production factories, foodstuff and dairy production equipment, petroleum and petrochemical industries, humidifier, air-conditioners, dentistry, medical cares, laundry, swimming pools, sauna, Jacuzzi, mug, aviculture, carwash equipment, dishwasher and washing machines, distillation machines and fountains …

All the above Pakab Control Electronic descalers except pac-31 are resistant with water splashing.

Pakab Control Electronic descalers with size over 8 inches are supplied on the order in advance

All the above Pakab Control Electronic descalers under water high hardness conditions can operate except Model PAC-01 that is recommended to be used in the regions in which water hardness is under PPM 250.     

All Pakab Control Electronic descalers are provided with 3-year warranty and 10 years after-sale-services.

Installation location of Pakab Control Electronic descalers have been shown following figures.

You’d better install system to the equipment in which sediment is more formed (for example it should be installed on inlet cold water pipe of heat exchanger, water heater, package or chiller.).