Burners

There are 75 products.

Important points to consider when selecting Burners :

A burner is the component that mixes a specific ratio of fuel and air (based on capacity) and then ignites the mixture to produce heat from fuel. The energy produced by the burner is transferred by radiation and convection to the fluid (mostly water) used in the heating system via the boiler.

Burners produce the source heat in boilers, heaters, and even tankless water heaters and act as the core of each heating system. They spray the fuel (gas, heavy oil, diesel fuel) and mix it with the air, pass it through a spreading component, and then ignite it via a spark in the combustion chamber to produce the heat required by a boiler or furnace. Burners and boilers include a number of controllers such as relays, photocell, ion, and thermostat, which are responsible for controlling the amount and timing of each process.Burner

Considering the imperfect combustion efficiency of burners and some other sources of heat loss, the burner capacity is usually selected 20% above that of the respective boiler.

Four points to consider about fuel combustion

  1. The heating value of a liter of diesel fuel is about 8,500 kcal
  2. The heating value of each kilogram of diesel fuel is about 10,500 kcal
  3. The heating value of each cubic meter of natural gas is approximately 9,200 kcal
  4. For each 300 meters of increased altitude from sea level, the reduction in air density decreases the combustion efficiency of most burners by about 4%

To select the burner, determine the fuel type and the respective heating value, the diameter of the flame trap tube for placement in the boiler, and the possibility of installing the burner in front of the boiler. You can consult with the technicians at Damatajhiz Co. to select your optimal burner.

Burners based on fuel-type:

  1. Gas burner
  2. Light oil burner
  3. Dual burner
  4. Heavy oil burner
  5. Multi burner

General Burners operations

  1. In fan burners, the onset of operation is based on the boiler thermostat and relay schedule. First, the ...

Important points to consider when selecting Burners :

A burner is the component that mixes a specific ratio of fuel and air (based on capacity) and then ignites the mixture to produce heat from fuel. The energy produced by the burner is transferred by radiation and convection to the fluid (mostly water) used in the heating system via the boiler.

Burners produce the source heat in boilers, heaters, and even tankless water heaters and act as the core of each heating system. They spray the fuel (gas, heavy oil, diesel fuel) and mix it with the air, pass it through a spreading component, and then ignite it via a spark in the combustion chamber to produce the heat required by a boiler or furnace. Burners and boilers include a number of controllers such as relays, photocell, ion, and thermostat, which are responsible for controlling the amount and timing of each process.Burner

Considering the imperfect combustion efficiency of burners and some other sources of heat loss, the burner capacity is usually selected 20% above that of the respective boiler.

Four points to consider about fuel combustion

  1. The heating value of a liter of diesel fuel is about 8,500 kcal
  2. The heating value of each kilogram of diesel fuel is about 10,500 kcal
  3. The heating value of each cubic meter of natural gas is approximately 9,200 kcal
  4. For each 300 meters of increased altitude from sea level, the reduction in air density decreases the combustion efficiency of most burners by about 4%

To select the burner, determine the fuel type and the respective heating value, the diameter of the flame trap tube for placement in the boiler, and the possibility of installing the burner in front of the boiler. You can consult with the technicians at Damatajhiz Co. to select your optimal burner.

Burners based on fuel-type:

  1. Gas burner
  2. Light oil burner
  3. Dual burner
  4. Heavy oil burner
  5. Multi burner

General Burners operations

  1. In fan burners, the onset of operation is based on the boiler thermostat and relay schedule. First, the air intake fan activates for 30-60 seconds with the command of the relay, and then the spark plug activates. After that, the electric fuel valve (gas, diesel fuel, mazut) opens and the fuel enters the combustion chamber of the boiler or heater. A spark then produces flame in front of the flame spreader.
  2. After the flame is produced, there will be no need for sparks or electric arcs, and commanded by the photocell or ion, the spark plug deactivates and the burner continues burning until the thermostat commands it to extinguish.
  3. The electromotor of the air intake fan works with single- or three-phase electricity based on the burner capacity and at a rotational velocity of 2900 RPM.
  4. The body of diesel or gas burner is normally made of cast aluminum, on which the other components are attached.

    burners

Gas burnerburners

  • The employed gas burners are designed to burn natural gas. The flow rate of gas is regulated by an electric valve and the combustion air is supplied by a blower installed on the motor axis.
  • Based on the capacity, air flow rate is regulated manually or automatically by a damper on the burner.
  • Gas passes through a filter, mixes with the air, and gets ready for combustion. If the combustion air pressure is insufficient or the gas pressure exceeds or drops below the considered gas pressure, the pressure sensors cause the burner to turn off via air and gas pressure switches controlled through a relay.
  • Gas burners come in the blower- or fan-equipped and fan-less (silent) types. Burners in apartment tankless water heaters are of the gas-powered type without blowers (silent).

Diesel burnerburners

  • Diesel burners use centrifugal fans for air intake. The fan is installed on the electromotor shaft with a rotational velocity of 2900 RPM.
  • When motor starts, the air intake fan activates and air starts flowing through the fins. The air flow is controlled by a damper at the intake gate, which is operated manually in small burners and by a servomotor in large burners. The air flow through the damper is regulated based on fuel quantity.
  • The diesel pump in high-pressure burners is normally of the rotary or gear type.

The operating mechanism of liquid fuel burner

The liquid fuel is vaporized (atomized) completely via a diesel or mazut pump to achieve a proper combustion. The powdered liquid fuel is mixed with air via a single or multiple nozzles (based on capacity). The air-fuel mix combusts with a spark generated by the spark plug. The combustion products must exit the combustion chamber after exchanging the heat.

Common features of liquid fuel burner

  • Require to atomize the liquid fuel;
  • Require the air and combustion air to mix.

Liquid fuels need to be atomized before combustion because mostly they have a low octane rating and are not easy to ignite when in liquid phase.

For instance, putting a lit match in a barrel of oil kills the flame quickly. Such fuels need to be vaporized (atomized) before ignition. Atomization increases the contact between the fuel and oxygen and enhances ignition.

For example, using a nozzle it is possible to convert oil fuel with a flow rate of 1 GPH under the operating pressure 7 bar into more than 50 billion oil droplets. The droplets vary between 0.0002–0.01 inches in diameter.

Four main groups of liquid-fuel burners

  • Pressure jet
  • Rotary cup
  • Air/steam atomized
  • Low-pressure air atomizing

Mazut burnerburners

  • These burners use a nozzle to vaporize the fuel. The droplets must have a specific pattern and leave the nozzle at a certain angle with uniform distribution. The most common pattern for the flow is the conical shape.
  • Vaporization of fuel requires energy. The said energy enters the system via a diesel or mazut pump as pressure, which is then converted into velocity.
  • When using a mazut burner, a preheater for fuel is necessary to prevent reduced flexibility of mazut in cold conditions.

Types mechanism of liquid fuel nozzles used in burners

A small component known as nozzle sprays fuel in pressure jet burners that use liquid fuel.

Nozzles vary regarding their flow rate and spray pattern and angles. The diesel pump pumps the fuel into the nozzle with pressure. When leaving the orifice, fuel escapes the center of the nozzle by the centrifugal force as a thin, high-velocity layer. There are three main types of nozzles by their spray pattern. The spray angle and pattern must be selected according to the combustion chamber and burner design. The standard fuel spray angles in nozzles are 30, 350, 60, 70, 80, and 90 degrees.

Read the “Selecting a nozzle for diesel burner” article for more information on the calculations and selection of liquid fuel nozzles for burners.

Air and fuel regulation in burner

Perfect combustion is achieved by accurately regulating the air-fuel ratio. The more accurate this ratio, the better the combustion efficiency and the less the fuel consumption. In smaller burners, a manually operated damper regulates this ratio, but in larger burners, an automated damper regulates air feed. As the temperature and humidity of the boiler vary during the year, large burners need re-configuration for their air damper in each season. Nowadays, modern burners employ a smart control system (PLC) to automatically regulate the air-fuel ratio during the day and all seasons.burners

Bi-fuel and multi-fuel burner

  • A burner that can burn more than a single fuel type is called bi-fuel or multi-fuel.
  • Bi-fuel burners normally use gas and diesel fuels. Burners that also burn mazut are called multi-fuel.
  • Multi-fuel burners need to use a preheater same as mazut burners and can use gas, diesel, and mazut fuels.

Placing an Order and Warranties for Burners

  • Offering best price guarantee for all products, the prices for Burners presented by DamaTajhiz are up-to-date and discount-included (see Best Price Guarantee at DamaTajhiz.com).
  • At DamaTajhiz.com, we provide all the information you need, as well as guaranteed unbeatable prices, for several models of Burners from reliable manufacturers, with original warranties, to bring you the thrill of an ideal, intelligent purchase.

 best price

Efficiency is our motto, your profit our priority

4 BTU = 1 K cal

Less
More
Showing 73 - 75 of 75 items

Filter by

Price
$ 0 $ 503
Manufacturers
more... less
By fuel type
more... less

Short Introdution

Since 2003, DamaTajhiz Online Store has been active in the supply of all types of heating, ventilation, and air conditioning (HVAC) equipment by management of Mr. Majid Zavvarian to meet needs of construction projects and consumers in the Middle East.

Investigating new methods of e-commerce and looking ahead to the future, DamaTajhiz Online Store designed its way of success as the first startup for selling installation equipment in Iran and the Middle East in 2004 by launching the most comprehensive specialized shopping website for all types of heating, ventilation, and air conditioning (HVAC), pool, sauna, and spa bath equipment.


Show More

News

Visit our blog